Hopefully this update finds you doing alright during this interesting time in history. The Signal Hound team (and families) are all well and good, adjusting to the current state of normal as best we can. A large part of our staff continues to work remotely, including our software developers who have just released some new—and […]Read the post
SM200C — 20 GHz Real-time Spectrum Analyzer with 10GbE
$21,265 – $23,693
The SM200C is a high-performance spectrum analyzer and monitoring receiver with a 10 Gigabit Ethernet SFP+ port, enabling the SM200C to communicate with a PC over long distances using a fiber optic cable. Designed for remotely-located accurate RF data analysis at the lowest cost possible.
The SM200C comes with a signed calibration certificate and a printed packet of calibration data.
A 10GbE-connected spectrum analyzer unrivaled in value
The SM200C is a high-performance spectrum analyzer and monitoring receiver with a 10 Gigabit Ethernet SFP+ port, enabling the SM200C to communicate with a PC over long distances using a fiber optic cable. Designed for remotely-located accurate RF data analysis at the lowest cost possible, the SM200C features:
- 160 MHz instantaneous bandwidth I/Q streaming over 10GbE
- SFP+ port for fast, long-distance communication with a PC using an optic cable
- Device control and data transfer occurs via SFP+ connection, not USB
- Tunes from 100 kHz to 20 GHz
- Sweeps at 1 THz/sec at 30 kHz RBW
- 110 dB of dynamic range
- Ultra-low phase noise
- GPIO port antenna switching
It is important to note that the SM200C includes all required software for operation. As with other Signal Hound devices, our Spike software provides the device controls, signal visualization display, and data export tools. Spike offers a variety of analysis modes and provides specific tools for EMC precompliance testing, interference hunting, and digital demodulation, among others.
For TSCM-specific applications, the SM200C is also compatible with the Kestrel and SCEPTRE software packages for the ultimate in affordable and powerful countermeasure solutions.
Watch the SM200C — 20 GHz Real-time Spectrum Analyzer with 10GbE in action
10 GbE Network Configuration Guide for SM200C Operation
Download this setup guide to connect your SM200C to your PC via the SFP+ port.
Download the guide (PDF, 975k)
Video review of the SM200C
Watch as Shahriar Shahramian of The Signal Path reviews the SM200C, including a variety of examples and demonstrations of the capabilities and speed of the analyzer.
Works with Spike spectrum analyzer software
Control your SM00C and analyze incoming RF data with Signal Hound’s Spike software. Spike runs on a desktop PC or Laptop and is included with the purchase of your SM200C.
Write custom applications for the SM200C with our open API
Use the device API for fast direct device control and and your custom applications. The SM200C API is available in our free SDK, and includes Windows 64/32 bit C APIs/DLLs, 64-bit Linux .so builds, and programming examples.
What’s included wtih the SM200C?
The SM200C is a high-performing 20 GHz spectrum analyzer, and includes all the components required to connect to your PC and signal source for immediate RF analysis.
SM200C — 20 GHz Real-time Spectrum Analyzer with 10GbE - Standard, Temperature Range: 0°C to +50°C
|Weight||7.77 lbs (3.52 kg)|
|Dimensions||10.2" x 7.2" x 2.15" (25.9 x 18.3 x 5.5 cm)|
No in-packaging dimensions available.
1 review for SM200C — 20 GHz Real-time Spectrum Analyzer with 10GbE
Software and Drivers
- Spectrum analysis software for all Signal Hound spectrum analyzers.
- Installs the USB drivers for the SM200.
Signal Hound Software Development Kit
- Includes SM200 device programming interface.
- Low level direct device control and measurements.
- 64/32-bit Windows and 64-bit Linux operating systems.
All manuals are included with the Spike software installer. For direct manual links see below.
10GbE Network Configuration Guide for SM200C
Firmware updater for all models of the SM200. You can see the current firmware version of your device in the Spike status bar.
Read the release_notes before updating the firmware on your device.
Firmware Updater (6/1/2020)
Software support for pre-production SM200A devices.
Spike with SM200A support (Version 3.1.10) (S/N 17249006 only)
SM200A API Version 1.0.1 (S/N 17249006 only)
Spike with SM200A support (Beta Version 3.1.9) (S/N 17249001 only)
SM200A API Version 1.0.0 (S/N 17249001 only)
Shalini Test user –