Signal Hound Field Calibration Software Release Notes

* Version 1.9.5 (7/21/20)
- Remove local cal files for SA and TG series devices upon loading an SA or TG series session.

* Version 1.9.4 (7/21/20)
- Fixed bug when loading/saving sessions in TG44/124 amplitude tests.
- Fixed bug when manually saving session.

* Version 1.9.3 (5/20/20)
- Update diagram for VSG60 IF flatness test.

* Version 1.9.0 (5/5/20)
- Added production calibration mode, which tests BB, SA, TG, and VSG25 to tighter limits.
- Added DC block to BB60C amplitude accuracy test diagrams.

* Version 1.8.10 (4/25/20)
- VSG25A test updates, more error reporting and signal validation.
- VSG25A tests replace production calibration test.

* Version 1.8.6 (2/24/20)
- Added support for SM200C.

* Version 1.8.5 (10/3/19)
- Officially added 20 dB attenuator to TG amplitude tests.

* Version 1.8.4 (8/28/19)
- Developmental updates to VSG60A tests and specs.

* Version 1.8.1 (7/23/19)
- Eliminated some spans in SA124B Amplitude vs IF test.

* Version 1.8.0 (6/13/19)
- Added VSG60A support.
- Fixed bug in reconnecting Signal Hound devices used as test equipment.

* Version 1.7.2 (5/9/19)
- Added SM200B support.
- Added ability to use SM200 as spec an for TG Timebase tests.
- Fixed bug in SM200 Spurious test alternatives (SFDR & TOI).
- Full refactor of equipment entry.
- Introduced Device abstract base class for SH devices.

* Version 1.7.1 (4/4/19)
- Fixed USB power sensor serial entry bug.
- Allowed manual cal due date entry for USB power sensor.
- Fixed bug in serial number edits.

* Version 1.7.0 (2/14/19)
- Added PNCS-1 support.
- Expanded signal check to 10 ppm in SA44B timebase test.
- Tweaked SA124B AAvsIF test.
- Updated BB API and 32-bit DLLs.

* Version 1.6.9 (9/27/18)
- Updated LO leakage test for BB60C-2 devices.

* Version 1.6.8 (8/20/2018)
- Added option to use SM200A as spec an in TG124A Amplitude Accuracy test.

* Version 1.6.7 (7/6/2018)
- Added abort button to all tests.

* Version 1.6.6 (6/26/2018)
- Added the ability to load and save calibration sessions.
- Expanded lower bound of SM200A spurious test to cover 10 MHz - 300 MHz in 10 MHz steps.
- Fixed bug in serial number printing of BB60C as spec an in VSG test.
- Fixed bug in equipment entry preset loading.
- Fixed func gen serial number bug.

* Version 1.6.5 (4/30/2018)
- SM API Version 1.0.4
- BB API Version 3.0.21
- SA API Version 3.1.0
- TG API Version 1.0.0
- VSG API Version 1.0.4
- Relaxed spec of 80 MHz - 6 GHz band in SM200A Residuals test to -100 dBm.
- Fixed bug in status calculation of SM200A Residuals test.
- Fixed bug in serial number line edit in equipment entry.
- Tweaked display of locked status in SM200A GPS test.

* Version 1.6.0 (3/21/2018)
- WARNING: This version of the software will falsely pass the SM200A residual test. Use version 1.6.5 for SM200A testing instead.
- Added support for SM200A. Added ability to perform a frequency-limited calibration on SA44B.

* Version 1.4.3 (12/14/2017)
- 32-bit version release

* Version 1.4.2 (11/3/2017)
- Updated DLLs for SA124 devices. Fixes low frequency amplitude accuracy issues.

* Version 1.4.1 (1/30/2017)
- Fixed bug in BB60A/C low amplitude accuracy tests where unit fails at bottom of spectrum due to 0 Hz feed through, because of high RBW setting.
- Fixed 0.1 KHz truncation in function generator set frequency SCPI command.

* Version 1.4.0 (1/10/2017)
- Support for the BB60A added to the software.
- Several SA124 connectivity diagrams were updated for clarity.

* Version 1.3.1 (12/13/2016)
- Brought back SFDR test, as a single-generator alternative to Third-Order Intercept / Two-Tone test for spurious responses.
- Handled case of no RF input signal in BB60C timebase test.
- Corrected time estimate for Tracking Generator amplitude tests.
- Manual model name entry for Agilent 8340 / HP BASIC-compatible generators.

* Version 1.3.0 (11/17/2016)
- Added support for testing Signal Hound SA124B, TG44A, and TG124A.

* Version 1.2.2 (9/16/2016)
- Fixed device information in SA44B report.

* Version 1.2.1
- Fixed bug where BB60C SFDR test raises a false negative on detecting the presence of an RF input signal.
- Added manufacturer field for DUT in report.

* Version 1.2.0
- Added support for testing Signal Hound SA44B.
- Changed BB60C SFDR test to a two-tone test, requiring a second signal generator.
- Changed specs for primary signal generator, allowing only modern SCPI-compliant models.
- Dropped support for non-optioned 83712B/83732B generators with step attenuator.
- Redesigned equipment entry to one dynamic screen.

* Version 1.1.0
- Added support for testing Signal Hound VSG25A.
- Added ability to store/recall passive devices.
- Stores GPIB addresses from last session and recalls them on test startup.

* Version 1.0.3
- Added support for 83712B/83732B generators with the support of an external step attenuator. See the user manual for required step attenuator/driver.
* Removed the Agilent 8340B and Agilent 8665B signal generators from the list of acceptable generators for the phase noise calibration test.

* Version 1.0.2
- Fixed an issue where connecting an 8340 signal generator caused the software to crash.
- Specified futher options required for Signal Generator models 83712B and 83732B. (Option 1E1)

* Version 1.0.1
- Bug Fix

* Version 1.0.0
- Initial Release